Acidity Modification of ZSM-5 for Methane Conversion in Co-feeding Method with MTA Reaction

Acidity plays a vital role in methane conversion by co-feeding method, which is one of the best strategies to improve the utilization and gentle the reaction conditions of methane. In this work, Zn, Ni, Mo, La, Ga, Fe and Co-impregnated ZSM-5 zeolites have been prepared with the same substitutions to variate the acidities and tested in co-aromatization of methanol with methane. It is demonstrated that the new medium-strong acid sites formed by metal and strong acid sites are the key role to activate methane in co-reaction. Zn-modified ZSM-5 catalyst is preferred to exhibit the best methane conversion of 12%, whose aromatic selectivity increases from 27.2% to 52.2% compared with that of HZSM-5. Besides, the addition of methane further improves the production of high-valued aromatics compared with methanol to aromatics (MTA) reaction.     

Experimental and numerical simulation of effects of CO2/N2 concentration and initial temperature on combustion characteristics of biomass syngas

Biomass syngas is a form of renewable energy with very broad application prospects, and it has different combustion characteristics according to the fuel composition and processing technology of biomass syngas. The influence of combustion composition, diluent and temperature variation on combustion characteristics were studied in this paper. The FFCM-1 mechanism was used to investigate the combustion characteristics of CO/CH₄/H₂ under varied diluents CO₂/N₂ and temperature by using spherical expansion flame method and ANSYS CHEMKIN-PRO. The experimental laminar burning velocity was compared with the simulation results of FFCM-1 mechanism. The results reveal that the experimental data are in good agreement with the simulation results, which are somewhat different under the condition of rich fuel. The laminar burning velocity decreases significantly with the increase of diluent CO₂/N₂, with the effect of diluent CO₂ being more significant. The laminar burning velocity increase dramatically with the increase of initial temperature, and the adiabatic flame temperature also decreases with the increase of diluent. The reduction caused by diluent CO₂ is much larger than that caused by diluent N₂. The change of initial temperature also affects the adiabatic flame temperature, but the range of variation is not as pronounced as that of diluent. Not only was the interaction between the combustion characteristics of CO/CH₄/H₂ under different diluents and temperature changes explored in this paper, but the influence mechanism was also revealed in depth.     

Effect of pressure gradients on the different stages of roughness induced boundary layer transition

The physical mechanisms of roughness-induced transition (RIT) in pressure gradient boundary layers are studied using direct numerical simulations. Recent investigations have examined RIT processes in zero-pressure-gradient boundary layers (Suryanarayanan et al., 2019). The present study uses a vorticity dynamics point of view to examine how these processes are altered by a locally accelerating or decelerating flow that strains the vorticity field and creates a net vorticity flux at the wall. Flow acceleration is imposed on specific streamwise extents of the flow. This provides an understanding about how the fundamental mechanisms in different stages of RIT are affected by pressure gradients. The present results suggest that both lift-up and subsequent amplification of the unsteady perturbations are mitigated by flow acceleration. The effect on lift-up is explained by the compression (i.e. large negative value of the stretching term) of the wall-normal vorticity by negative dv/dy. Consistent with earlier experimental observations on spots and wedges, favorable pressure gradients reduce turbulent wedge spreading and nearly arrest the spreading when sufficiently strong. This result is also explained in terms of vorticity dynamics.     

Investigation on the effect of density ratio on the convergence behavior of partitioned method for fluid–structure interaction simulation

In order to investigate the effect of density ratio of fluid and solid on the convergence behavior of partitioned FSI algorithm, three strong-coupling partitioned algorithms (fixed-point method with a constant under-relaxation parameter, Aitken’s method and Quasi-Newton inverse least squares (QN-ILS) method) have been considered in the context of finite element method. We have employed the incompressible Navier–Stokes equations for a Newtonian fluid domain and the total Lagrangian formulation for a non-linear motion of solid domain. Linear-elastic (hyper-elastic) model has been employed for solid material with small (large) deformation. A pulsatile inlet-flow interacting with a 2D circular channel of linear-elastic material and a pressure wave propagation in a 3D flexible vessel have been simulated. Both linear-elastic and hyper-elastic (Mooney–Rivlin) models have been adopted for the 3D flexible vessel. From the present numerical experiments, we have found that QN-ILS outperforms the others leading to a robust convergence regardless of the density ratio for both linear-elastic and hyper-elastic models. On the other hand, the performances of the fixed-point method with a constant under-relaxation parameter and the Aitken’s method depend strongly on the density ratio, relaxation parameter selected for coupling iteration, and degree of deformation. Although the QN-ILS of this work is still slower than a monolithic method for serial computation, it has an advantage of easier parallelization due to the modularity of the partitioned FSI algorithm.     

基于Retinex理论与概率非局部均值的红外图像增强方法

针对传统红外图像增强算法中细节模糊及过度增强的问题,提出了一种基于Retinex理论与概率非局部均值相结合的红外图像增强方法.首先通过单尺度Retinex方法调整图像中过暗与过亮部分的灰度级;然后利用概率非局部均值对图像进行分解处理得到基本层与细节层,对基本层采用直方图均衡化拉伸对比度,对细节层采用非线性函数进行增强;最后,将不同层次的结果融合得到对比度与细节增强的红外图像.用该方法对多组不同场景的红外图像进行仿真实验,并将其与多种增强方法进行主、客观对比分析,结果表明所提方法在红外图像的细节及对比度增强方面都获得了更好的效果.     

基于串联两阶段网络DEA模型的供应链规模收益分析

数据包络分析(DEA)是评价供应链系统(Supply chain system)间相对有效性的一种重要的工具,但是传统的DEA不考虑供应链的内部结构,对系统效率评价偏高;而本文所研究两阶段串联供应链系统,考虑把部分中间产品作为最终产品输出,增加额外中间投入的情形.基于所提出的供应链系统结构,本文建立相应的串联结构下的网络DEA模型,并针对所建立模型进行相关理论的研究,给出了串联结构下的生产可能集和规模收益情况判定方法.最后,进行数值实验,以验证我们提出的结论.     

Infinite family of transmission irregular trees of even order

Distance between two vertices is the number of edges in a shortest path connecting them in a connected graph $G$. The transmission of a vertex $v$ is the sum of distances from $v$ to all the other vertices of $G$. If transmissions of all vertices are mutually distinct, then $G$ is a transmission irregular graph. It is known that almost no graphs are transmission irregular. Infinite families of transmission irregular trees of odd order were presented in Alizadeh and Klav?ar (2018). The following problem was posed in Alizadeh and Klav?ar (2018): do there exist infinite families of transmission irregular trees of even order? In this article, such a family is constructed.